Assessment Tools

Homax Orange Peel Spray Texture

Wagner Spray Tech 520000 Power Tex Texture Sprayer $88.59 The Wagner Power Tex is an all-in-one powered texture sprayer–no separate air compressor or air hoses needed! It has a built-in turbine with more than enough power to texture an entire ceiling, yet it is simply designed, so it’s great for even small touch-up jobs. And because it features Wagner’s Lock-n-Go Technology, setup and cleanup are fast and easy with no tools required.The Wagner Power Tex…

Air Texture Spray Hopper Compressor Gun Ceiling Tool $22.65 Use this Air Texture Spray Gun to apply texturing material to ceiling and walls. Our Kit includes 4 different nozzles to achieve just about any texture effect. Our Kit features: * A Pistol Air Texture Gun * Large plastic 1 3/4 gallon hopper. Hopper is mad…

Ridgid WD1450 14-Gallon 6-Horsepower Wet/Dry Vacuum $136.99 Power head with new patented SNR Scroll Noise Reduction design. Tug-A-Long positive locking hose. Removable accessory storage bag. Filtration – 3-layer material treated with microban. Large built-in drain….

Al’s Liner ALS-SG Professional Series Air Texture Spray Gun $55.00 AL’S SPRAY GUN – Al’s liner air texture gun has a special 5-point spray texture nozzle which enables the applicator to achieve different textures and finishes. Contents: air texture gun, 1.25 gallon hopper, 3 texture orifices, 5 point texture nozzle….

Shop-Vac 5851200 12-Gallon 5.0-Peak HP Quiet Plus Series Wet/Dry Vacuum $177.95 12 Gallon, 5.0 Peak HP, Wet/Dry Vac, Accessories Included: 6′ x 2.5′ Hose, 2-1/2′ Extension Wands, 8′ Utility Nozzle, Foam Sleeve, Reusable Dry Filter & Tool Holder, 12′ Power Cord, Quiet Operation, Built In Top Carry Handle, Large On/Off Switch, Convenient Cord Wrap, UL Listed….

Spaulding Drywall $35 Spaulding Drywall:

The Hillman Group #1 Coarse Drywall Screws 6X2 $5.99 Drywall screws are for attaching drywall to wood studs

The Hillman Group Fine Thread Phillips Drive Drywall Screw 6X1-1/4 In. $3.49 Drywall screws are for attaching drywall to wood studs

The Hillman Group 1 pound Fine Thread Drywall Screw Ph 6X1-1/4 $5.99 Drywall screws are for attaching drywall to wood studs

The Hillman Group Coarse Thread Phillips Drive Drywall Screw 6X1-1/4 In. $2.19 Drywall screws are for attaching drywall to wood studs

The Hillman Group 1 pound Coarse Thread Drywall Screw Ph 6X1-1/4 $5.49 Drywall screws are for attaching drywall to wood studs

The Hillman Group Fine Thread Phillips Drive Drywall Screw 6X1-5/8 In. $2.19 Drywall screws are for attaching drywall to wood studs

The Hillman Group 1 pound Fine Thread Drywall Screw Ph 6X1-5/8 $5.99 Drywall screws are for attaching drywall to wood studs

The Hillman Group Coarse Thread Phillips Drive Drywall Screw 6X1-5/8 In. $2.19 Drywall screws are for attaching drywall to wood studs

The Hillman Group 1 pound Coarse Thread Drywall Screw Ph 6X1-5/8 $5.49 Drywall screws are for attaching drywall to wood studs

The Hillman Group 1 pound Fine Thread Drywall Screw Ph 6X2 $5.99 Drywall screws are for attaching drywall to wood studs

DEWALT Drywall Screw Setter $2.99 The DEWALT tool-steel drywall screw setter provides a screw gun feature for your power drill. It countersinks phillips head screws to the proper depth in drywall, particle board and plywood.

Bosch DIESEL INJECTION NOZZLES $48.14 DIESEL INJECTION NOZZLES Precision-drilled spray holes measure exact fuel delivery for optimum power and minimum emissions High alloy and chrome steel construction delivers maximum durability Needle-to-body gap ensures proper hydraulic performance for maximum fuel efficency Hydraulic grinding allows smoother fuel passage through the spray hole to ensure that the nozzle operates at peak performance throughout its service life A dual-angle needle design ensures a precise contact point for positive sealing and optimum performance

Reverse Trumpet Nozzles Turret $24.5 18 clog resistant nozzles provide precise streams for even watering, covers up to 3900 sq. ft. Infinitely adjustable in width and length to fit any yard. Nozzle shut offs for width and adjustable range control. Water flow control allows pressure adjustment. Long life motor will not clog pr puddle, designed to last season after season.

Dremel 1/8 In. Drywall Cutting Bit $4.99 A high-speed cutter with a 1/8″ steel shank that makes fast clean cuts in drywall.

FibaTape 250 Ft. Paper Drywall Joint Tape $1.99 FibaTape product line offers innovative drywall products for both the contractor and dyer. The FibaTape products are high performance products, designed to be easier, faster and stronger, deliver excellent value and performance.

Gravel Vacuum Cleaner With Nozzles For Aquariums $16.9 The 24 gravel vacuum cleaner with nozzle is Designed to Separate and Remove Debris From Aquarium Gravel. Product is made with Plastic.

3M Drywall Sanding Sheets, 4.1875 In. x 11 In., 2 Sheet Fine Grit $3.49 3M drywall sanding sheets attach quickly to hand or pole sanders with pre-cut tabs. They cut fast and smooth for use sanding drywall joint and patching compounds and plaster to a fine finish.

Bongzilla 6 Tube Beer Bong with Nozzles $49.99 Bongzilla is the ultimate party favor! This six-person beer bong funnel stands on a sturdy 6 foot tall pole and has 6 tube funnels, making it easy for you and 5 friends to simultaneously chug beer!

Double Header 2 Tube Beer Bong with Nozzles $17.99 The Double Header Beer Bong is a great way to break the ice on a first date, put down those nasty cheap beers as fast as possible or just generally have a good time. It isn’t a party until the beer

The Hillman Group Stainless Steel Square Drive Deck Screw 6X1-1/4 In. $2.19 Drywall screws are for attaching drywall to wood studs

RotoZip 2 Piece Drywall X-Bit? Pack $9.99 RotoZip X-Bits? are contractor rated for maximum durability. Anyone who has to work in difficult materials needs the RotoZip Spiral Saw System.

The Hillman Group Zip It & Zip It Jr. Wallboard Anchors Combo Pack With Screws $15.99 Self drilling anchor designed for a variety of fixtures in drywall.

The Hillman Group Zip Toggle Anchors With 6 X 2 In. Screws $3.19 Heavy duty self drilling anchor for drywall.

The Hillman Group Zip It Nylon Wallboard Anchors With 8 X 1-1/4 In. with Screws $8.79 Self drilling anchor designed for a variety of fixtures in drywall.

The Hillman Group Zip It Zinc Wallboard Anchors With 8 X 1-1/4 In. with Screw $8.79 Self drilling anchor designed for a variety of fixtures in drywall.

The Hillman Group Zip It Jr. Zinc Wallboard Anchors With 6 X 1 In. With Screws $8.79 Self drilling anchor designed for a variety of fixtures in drywall.

The Hillman Group Zip It Jr. Nylon Wallboard Anchors With 6 X 1 In. with Screw $2.49 Self drilling anchor designed for a variety of fixtures in drywall.

The Hillman Group Zip It Nylon Wallboard Anchors With Colored Screws $8.79 Self drilling anchor designed for a variety of fixtures in drywall.

The Hillman Group Zip It Nylon Wallboard Anchors With 8 X 1-1/4 In. Brass Screws $2.59 Self drilling anchor designed for a variety of fixtures in drywall.

Amerimax Home Products 1-1/4 In. x 8 Ft. Galvanized Corner Bead $1.99 Metal drywall beads and trims are traditional reinforcement and finishing products used in gypsum wallboard construction. Metal beads and trims provide crisp, clean and straight protection for drywall corners. The most common metal trim is drywall corner

Grabber Construction Products 8×2-1/2 In. Bugle Head, Coarse $6.49 Grabber coarse thread drywall screws feature super-sharp points and threads for quick penetration into drywall and wood. Grabber coarse thread screws are ideal for drywall installation and many other interior wood fastening applications.

Grabber Construction Products 8×3 In. Bugle Head, Coarse Thread $6.49 Grabber coarse thread drywall screws feature super-sharp points and threads for quick penetration into drywall and wood. Grabber coarse thread screws are ideal for drywall installation and many other interior wood fastening applications.

Grabber Construction Products 6×1 In. Bugle Head, Coarse Thread $6.49 Grabber coarse thread drywall screws feature super-sharp points and threads for quick penetration into drywall and wood. Grabber coarse thread screws are ideal for drywall installation and many other interior wood fastening applications.

Grabber Construction Products 6×1-1/4 In. Bugle Head, Coarse $6.49 Grabber coarse thread drywall screws feature super-sharp points and threads for quick penetration into drywall and wood. Grabber coarse thread screws are ideal for drywall installation and many other interior wood fastening applications.

Grabber Construction Products 6×1-5/8 In. Bugle Head, Coarse $6.49 Grabber coarse thread drywall screws feature super-sharp points and threads for quick penetration into drywall and wood. Grabber coarse thread screws are ideal for drywall installation and many other interior wood fastening applications.

Grabber Construction Products 7×2 In. Bugle Head, Coarse Thread $6.49 Grabber coarse thread drywall screws feature super-sharp points and threads for quick penetration into drywall and wood. Grabber coarse thread screws are ideal for drywall installation and many other interior wood fastening applications.

3M Sanding Screen Medium, 4-3/16 In. x 11-1/4 In. $3.99 Medium Grit Drywall Sanding Screen is made to fit most Drywall Sanding tools. Made with a sharp silicon carbide mineral for long-lasting performance.

Toro 570 Nozzle Adjustable 0-360, 17 Ft. $3.49 570 MPR nozzles are ideal for small lawn, shrub and bed areas.

Plasmaglow LED Windshield Washer Lights $18.99 PLASMAGLOW LED WINDSHIELD WASHER LIGHTS PlasmaGlow LED Washer Nozzle Lights replace your stock washer nozzles, but have built-in LEDs to light up your hood. Two nozzles are included per pack, and feature dual nozzles to also increase cleaning performance over your stock nozzles. Lifetime Warranty.

Edelbrock Nitrous Oxide РNitrous Nozzle Pipe Tap 1/16 [Universal - Fits all Vehicles] $37.95 NPT taps cut threads for custom installation of Edelbrock nitrous nozzles. Use Pipe Tap 1/16̦ for Edelbrock Series 2 and dry nozzles

Edelbrock Nitrous Oxide РNitrous Nozzle Pipe Tap 1/8 [Universal - Fits all Vehicles] $32.25 NPT taps cut threads for custom installation of Edelbrock nitrous nozzles. Use Pipe Tap 1/8̦ for Edelbrock Series 1 nozzles.

Homax Knockdown Spray Texture – 10oz $11.99 Specially formulated for patching Knockdown or “Mediterranean” type drywall textures. Two straws enable matching of medium or heavy texture patterns. Once applied, texture is knocked down using a drywall knife.

Homax Aerosol Knockdown Texture, 20 Oz $14.99 Specially formulated for patching Knockdown or “Mediterranean” type drywall textures. Dial it in nozzle allows you to match medium or heavy texture patterns. Once applied, texture is knocked down using a drywall knife.

Dremel Multipurpose Cutting Kit $15.99 The Multipurpose Cutting Kit allows for sturdy, controlled cuts in a variety of materials including: drywall, laminate, fiberglass, plastic and vinyl siding.

RotoZip 8 Piece 1/8 In. Guidepoint Bit Pack $8.99 The Guidepoint Guide ZipBit is perfect for controlled drywall cut-outs when used with your RotoZip tool.

Allway Disposable Corner Tool $1.49 The Allway DCT disposable corner tool is made of solvent proof Celcon. Use in corners during drywall taping.

Edelbrock E3 Series Titanium Direct Port Nitrous Nozzle $620.95 Edelbrock nitrous oxide nozzles are the most advanced nozzles available, producing the highest power output in the industry. The E Series nozzles are available in three distinct designs E1 aluminum 90 degree 18 NPT, E2 stainless steel 90 degree 116 N

Edelbrock E1 Series Notrous Nozzle $493.95 Edelbrock nitrous oxide nozzles are the most advanced nozzles available, producing the highest power output in the industry. The E Series nozzles are available in three distinct designs E1 aluminum 90 degree 18 NPT, E2 stainless steel 90 degree 116 N

Edelbrock E2 Series Nitrous Nozzle $647.95 Edelbrock nitrous oxide nozzles are the most advanced nozzles available, producing the highest power output in the industry. The E Series nozzles are available in three distinct designs E1 aluminum 90 degree 18 NPT, E2 stainless steel 90 degree 116 N

Edelbrock 116 in. NPT 90 Degree Dry Nitrous Nozzle $23.95 Edelbrock nitrous oxide nozzles are the most advanced nozzles available, producing the highest power output in the industry. The E Series nozzles are available in three distinct designs E1 aluminum 90 degree 18 NPT, E2 stainless steel 90 degree 116 N

Edelbrock 116 in.NPT 90 Degree Stainless Steel Dry Nitrous Nozzle $38.95 Edelbrock nitrous oxide nozzles are the most advanced nozzles available, producing the highest power output in the industry. The E Series nozzles are available in three distinct designs E1 aluminum 90 degree 18 NPT, E2 stainless steel 90 degree 116 N

Edelbrock 18 in. NPT 90 Degree 1 Series Nitrous Nozzle $64.95 Edelbrock nitrous oxide nozzles are the most advanced nozzles available, producing the highest power output in the industry. The E Series nozzles are available in three distinct designs E1 aluminum 90 degree 18 NPT, E2 stainless steel 90 degree 116 N

Grabber Construction Products 6×1-5/8 In. Scavenger Head, Fine $6.49 Fine thread bugle head screws for drywall and general interior applications. Scavenger head eliminates drywall paper burrs, creating a smooth professional finish. Super sharp 30° Streaker point means quick and easy penetration into light gauge metal.

Grabber Construction Products 6×1-1/8 In. Scavenger Head, Fine $6.49 Fine thread bugle head screws for drywall and general interior applications. Scavenger head eliminates drywall paper burrs, creating a smooth professional finish. Super sharp 30° Streaker point means quick and easy penetration into light gauge metal.

SHURSTIK 10 Oz Permanent Patch 100 $4.99 A heavy bodied elastomeric patch that provides a textured finish. Use for interior/exterior repairs on stucco, wood, concrete, drywall, brick and other surfaces.

SHURSTIK Permanent Patch 102 $8.99 A heavy bodied elastomeric patch that provides a textured finish. Use for interior/exterior repairs on stucco, wood, concrete, drywall, brick and other surfaces.

SHURSTIK Permanent Patch 100 $26.99 A heavy bodied elastomeric patch that provides a textured finish. Use for interior/exterior repairs on stucco, wood, concrete, drywall, brick and other surfaces.

SHURSTIK 1 Qt Permanent Patch 100 $8.99 A heavy bodied elastomeric patch that provides a textured finish. Use for interior/exterior repairs on stucco, wood, concrete, drywall, brick and other surfaces.

Allway 12 In. Soft Grip Tape Knife $6.99 The Allway BTK12 is an 12in Tape Knife equipped with a comfortable soft grip. The blade is blue steel, and the tool has a hammer end for sinking drywall nails.

Allway 10 In. Soft Grip Tape Knife $6.59 The Allway BTK10 is an 10in Tape Knife equipped with a comfortable soft grip. The blade is blue steel, and the tool has a hammer end for sinking drywall nails.

Allway 8 In. Soft Grip Tape Knife $5.99 The Allway BTK8 is an 8in Tape Knife equipped with a comfortable soft grip. The blade is blue steel, and the tool has a hammer end for sinking drywall nails.

SHURSTIK 1 Qt Permanent Patch 101 $6.59 A heavy bodied elastomeric patch that provides a textured finish. Use for interior/exterior repairs on stucco, wood, concrete, drywall, brick and other surfaces.

SHURSTIK 10 Oz Permanent Patch 101 $2.99 A heavy bodied elastomeric patch that provides a textured finish. Use for interior/exterior repairs on stucco, wood, concrete, drywall, brick and other surfaces.

Homax Wall Patch, 8 In. x 8 In. $5.99 Permanently repair damaged walls and ceilings using the wall patch. Easy-to-use, self-adhesive mesh holds galvanized metal drywall patch during repair.

Toro 570 MPR+ Nozzle, 180-Degree – 15 Ft. $2.49 Toro 570 MPR+ nozzles feature a pressure-compensating device that eliminates misting and fogging and conserves water. Toro?s matched precipitation rate (MPR) nozzles ensure that any Toro nozzle applies water at the same rate regardless of radius or patter

Toro 570 MPR+ Nozzle, 90-Degree – 15 Ft. $2.49 Toro 570 MPR+ nozzles feature a pressure-compensating device that eliminates misting and fogging and conserves water. Toro?s matched precipitation rate (MPR) nozzles ensure that any Toro nozzle applies water at the same rate regardless of radius or patter

Toro 570 0-360 Degree Van Nozzle – 8 Ft. (2 Pack) $3.49 Toro’s matched precipitation rate (MPR) nozzles are color coded for easy identification. Matched precipitation rates ensure all nozzles (Every radius and pattern) apply water at the same rate (Inches per hour). Uniform part-circle watering patterns elimin

Toro 570 MPR+ Nozzle, 90-Degree – 8 Ft. $2.49 Toro 570 MPR+ nozzles feature a pressure-compensating device that eliminates misting and fogging and conserves water. Toro?s matched precipitation rate (MPR) nozzles ensure that any Toro nozzle applies water at the same rate regardless of radius or patter

Toro 570 0-360 Degree Van Nozzle – 12 Ft. (2 Pack) $3.49 Toro’s matched precipitation rate (MPR) nozzles are color coded for easy identification. Matched precipitation rates ensure all nozzles (Every radius and pattern) apply water at the same rate (Inches per hour). Uniform part-circle watering patterns elimin

Toro 570 MPR+ Nozzle, End Strip, 4 Ft. x 15 Ft. $2.69 Toro 570 MPR+ nozzles feature a pressure-compensating device that eliminates misting and fogging and conserves water. Toro?s matched precipitation rate (MPR) nozzles ensure that any Toro nozzle applies water at the same rate regardless of radius or patter

Toro 570 MPR+ Nozzle, Center Strip, 4 Ft. x 30 Ft. $2.69 Toro 570 MPR+ nozzles feature a pressure-compensating device that eliminates misting and fogging and conserves water. Toro?s matched precipitation rate (MPR) nozzles ensure that any Toro nozzle applies water at the same rate regardless of radius or patter

Toro 570 MPR+ Nozzle, Side Strip, 9′ x 18′ $2.69 Toro 570 MPR+ nozzles feature a pressure-compensating device that eliminates misting and fogging and conserves water. Toro?s matched precipitation rate (MPR) nozzles ensure that any Toro nozzle applies water at the same rate regardless of radius or patter

Toro 570 MPR+ Nozzle, Side Strip, 4 Ft. x 30 Ft. $2.69 Toro 570 MPR+ nozzles feature a pressure-compensating device that eliminates misting and fogging and conserves water. Toro?s matched precipitation rate (MPR) nozzles ensure that any Toro nozzle applies water at the same rate regardless of radius or patter

Toro 570 MPR+ Nozzle, 180-Degree – 5 Ft. $2.49 Toro 570 MPR+ nozzles feature a pressure-compensating device that eliminates misting and fogging and conserves water. Toro?s matched precipitation rate (MPR) nozzles ensure that any Toro nozzle applies water at the same rate regardless of radius or patter

Toro 570 MPR+ Nozzle, 360-Degree – 5 Ft. $2.49 Toro 570 MPR+ nozzles feature a pressure-compensating device that eliminates misting and fogging and conserves water. Toro?s matched precipitation rate (MPR) nozzles ensure that any Toro nozzle applies water at the same rate regardless of radius or patter

Toro 570 MPR+ Nozzle, 90-Degree – 5 Ft. $2.49 Toro 570 MPR+ nozzles feature a pressure-compensating device that eliminates misting and fogging and conserves water. Toro?s matched precipitation rate (MPR) nozzles ensure that any Toro nozzle applies water at the same rate regardless of radius or patter

Toro 570 MPR+ Nozzle, 180-Degree – 8 Ft. $2.49 Toro 570 MPR+ nozzles feature a pressure-compensating device that eliminates misting and fogging and conserves water. Toro?s matched precipitation rate (MPR) nozzles ensure that any Toro nozzle applies water at the same rate regardless of radius or patter

Toro 570 MPR+ Nozzle, 360-Degree – 8 Ft. $2.49 Toro 570 MPR+ nozzles feature a pressure-compensating device that eliminates misting and fogging and conserves water. Toro?s matched precipitation rate (MPR) nozzles ensure that any Toro nozzle applies water at the same rate regardless of radius or patter

Toro 570 0-360 Degree Van Nozzle – 15 Ft. (2 Pack) $3.49 Toro’s Matched Precipitation Rate (MPR) Nozzles are color coded for easy identification. Matched precipitation rates ensure all nozzles (every radius and pattern) apply water at the same rate (inches per hour). Uniform part-circle watering patterns elim

Edelbrock Nozzle Installation Bungs Aluminum $21.95 These aluminum bungs allow installation of Edelbrock nozzles in the intake tract in thin walled sheetmetal manifolds. They require welding, drilling and tapping for installation.

FibaTape 7 In. Wall Bandage – Repair Patch $3.89 FibaTape line offers a complete line of innovative drywall finishing solutions for contractors and diverter. These high performance products are designed to be easier, faster and stronger and to deliver excellent value and performance.

SHURSTIK Non-Shrink Spackle $16.99 ShurStik?s Wall Fix Lightweight Spackling may be used on interior and exterior surfaces such as drywall, plaster, wood, concrete and stucco to patch and repair small holes, cracks, crevices, dimples and damaged surfaces. This ready-to-use, lightweight for

Grabber Construction Products 8×3 In. Bugle Head, Fine Thread $6.49 Fine thread bugle head screws for drywall and general interior applications. Super sharp 30° Streaker point means quick and easy penetration into light gauge metal.

Grabber Construction Products 8 x 2-1/2 In. Bugle Head, Fine Thread $6.49 Fine thread bugle head screws for drywall and general interior applications. Super sharp 30° Streaker point means quick and easy penetration into light gauge metal.

PL 10 Oz Mirror Adhesive $7.99 Loctite PL Mirror Adhesive is a high performance adhesive formulated especially for mounting mirrors. It can be used on most structurally sound interior surfaces such as wood, drywall, metal and painted surfaces. This mirror adhesive remains flexible and

Craftsman 1.25 In. Wet/Dry Combo Nozzle $9.99 The Craftsman 1.25 In. wet/dry combo nozzle is two nozzles in one. The squeegee insert can be used for wet pick-ups and the brush insert can be used for dry pick-ups.

Watering Hoses: Spray Nozzle- Industrial High Pressure $11.45 “Industrial nozzles from Nelson feature the finest engineering designs and highest material quality. Hot water and high pressure ratings for Nelson nozzles are the highest in the consumer hose-end industry. This industrial front trigger spray nozzle is made from industrial rated heavy duty zinc die-cast construction with a reinforced solid brass stem and nut, and a brass memory tip that adjusts from fine mist to full stream. THERMOGAURD insulation provides hot and cold water comforts along with ”

Any Position Spray Nozzle, 10-pack $18 Anyway Spray Nozzle! This is the perfect replacment for troublesome nozzles. It’s special design allows it to be used upside down or in any position. Ideal for flyspraying the undercarriage of horses. 9 Long. Pack of 10.

Cake Decorating Decorator Icing Piping Syringe Tool Set $8.79 - Cake decorating syringe – Easy to use and clean – Great for icing, piping and general cake decoration – Package include: 1 x Syringe, 15 x Nozzles – Syringe length: 185mm ( not with the tips in ) – Cylinder length: 150mm ? ?

Edelbrock 116 in.NPT Titanium Direct Port 3 Series Nitrous Nozzle $80.95 These Series 3 titanium direct port nozzles from Edelbrock, otherwise known as the E3, are the latest design for all-out competition. They produce the highest power output of any nozzle currently available, according to Edelbrock. Their straight-shot

Water Container with Cart $246.48 Use a refreshing spray or water fountain. For games, practices, or field trips. 3 gallon capacity. Rust proof pump and plastic hose. Comes with four nozzles.To order the Water Container separately, click here.

Craftsman Nextec 12 V Multi-Tool $99.99 One tool designed to handle multiple jobs! Craftsman innovative oscillating action combined with multiple blade options let you complete all sorts of DIY work. The multi-tool powers through jobs such as cutting in wood, drywall or metal, sanding in tight

Craftsman 20 gal, 6.5 Peak HP Wet/Dry Vac $119.99 The Craftsman 20 gal wet/dry vac is the perfect size for the biggest jobs. Its motor has the power to clean-up construction projects and drywall dust, leaky basements/flooding, and your garage or workshop. Insert the hose into the rear blowing port and th

DEWALT 9 6 TPI Demolition Bi-Metal Reciprocating Saw Blade (5 pack) $21.99 The DEWALT 9″ 6 TPI Demolition Bi-Metal Reciprocating Saw Blade (5 pack) delivers a professional quality solution for cutting plaster, drywall, or plastic. This blade is designed to provide a smoother finish and fast cuts, so you don’t have to sacrifice

RotoZip Spiral Saw Kit $59.99 The RZ1 Spiral Saw allows for fast freehand cuts through ceramic tile, cement board, acoustical tile, drywall, counter tops wood, fiberglass, laminates, plastic and plaster. This 5 amp tool has a soft band – walkman style handle that provides a comfortabl

Homax Oil-Based Aerosol Spray Texture, 20 oz $14.99 Our original oil-based spray texture is the fastest and easiest way to patch orange peel and splatter drywall textures. Different size spray patterns can be achieved by using one of the three color-coded straws. The ultra-fast drying, premium-bodied textu

Craftsman 10A Orbital Reciprocating Saw $79.99 10A Powerful Craftsman motor provides power for cutting in wood, metal, plastic, drywall and other materials.Tool-less blade change system for fast and easy blade changes.Variable speed: 800-2700RSPM- easy to operate variable speed dial. Orbital function

Jet Blast 32 Water Broom $239.6 PLEASE NOTE: THIS ITEM CANNOT SHIP VIA 3-DAY DELIVERY.The Jet Blast Broom makes cleaning dirt and debris on all types of surfaces a breeze. Simply attach a standard water hose to the handle and you’re ready to go. The 32″ head is fitted with eight high-pressure nozzles, while the 48″ head has 12 nozzles. Constructed of heavy-duty, lightweight aluminum.

Jet Blast 48 Water Broom $280.68 PLEASE NOTE: THIS ITEM CANNOT SHIP VIA 3-DAY DELIVERY.The Jet Blast Broom makes cleaning dirt and debris on all types of surfaces a breeze. Simply attach a standard water hose to the handle and you’re ready to go. The 32″ head is fitted with eight high-pressure nozzles, while the 48″ head has 12 nozzles. Constructed of heavy-duty, lightweight aluminum.

Deluxe Adjustable Wall Mounted Chinning Bar $298.33 Perfect for elementary through university level useOak back-mounts for illustrative purposes onlyProvides 2′ of height adjustment in 6″ incrementsHas all-welded 30″ wide steel frame work and a powder coated finishAnchors, wood back mounts and mounting hardware not includedNOTE: Must be mounted to brick or studs, not drywall.

Toro 570 Shrub Spray with Side Strip Nozzle – 4 Ft. x 30 Ft. $2.29 Mount this shrub spray sprinkler on a 1/2 In. National pipe thread (NPT) riser with any 570 fixed-spray nozzle and effectively irrigate small shrubs and planters without water waste. Matched precipitation rates ensure all nozzles (Every radius and pattern

Toro 570 Shrub Spray with Center Strip Nozzle – 4 Ft. x 30 Ft. $2.29 Mount this shrub spray sprinkler on a 1/2 In. National pipe thread (NPT) riser with any 570 fixed-spray nozzle and effectively irrigate small shrubs and planters without water waste. Matched precipitation rates ensure all nozzles (Every radius and pattern

Toro 570 Shrub Spray with End Strip Nozzle – 4 Ft. x 15 Ft. $2.29 Mount this shrub spray sprinkler on a 1/2 In. National pipe thread (NPT) riser with any 570 fixed-spray nozzle and effectively irrigate small shrubs and planters without water waste. Matched precipitation rates ensure all nozzles (Every radius and pattern

Full Flow Shot-Off Valve – Green $4.7 Poly green single swivel shut-off valve, with 45% more water flow. Maximum water flow equals maximum performance from sprinklers and nozzles. The single shut-off valve controls water flow. Extra large handles for easy grip and turn. Easy swivel on.Color: Green

Compact Turbo Pro Ceramic Ionic Far Infrared Hair Dryer(Black) $57.27 - Ceramic, ionic & far infrared for smooth shiny hair – Ionic – technology dries up hair faster by breaking up water molecules. – 1400 Watts of Power – 3 Temperature Settings – Ceramic Covered Insulation & Grid? – Instant Cold Shot Button – One Unbreakable Concentrator Nozzles

Edelbrock 50 to 125 HP Victor Direct Port Nitrous System for 4 cyl $669.95 Our most sophisticated nitrous systems allow you to tune each individual cylinder for superior performance Utilizing your choice of either Edelbrock E1, EdelbrockGidden E2 stainless steel, our unique E3 titanium 3939Straight-Shot3939 nozzles, or our

Edelbrock 50 to 150 HP Victor Direct Port Nitrous System for 4 cyl $754.95 Our most sophisticated nitrous systems allow you to tune each individual cylinder for superior performance Utilizing your choice of either Edelbrock E1, EdelbrockGidden E2 stainless steel, our unique E3 titanium 3939Straight-Shot3939 nozzles, or ou

Edelbrock 116 in.NPT 90 Degree Glidden 2 Series Nitrous Nozzle $83.95 Designed by noted drag racer Billy Glidden, these Edelbrock Series 2 stainless nitrous oxide nozzles are used in Edelbrock Victor and Super Victor direct port nitrous kits. They are manufactured from stainless steel to precisely atomize the nitrous a

Classic Accessories Inflatable Watercraft Hand Pump $26.56 The Classic Accessories Inflatable Watercraft Hand Pump is the perfect addition to any pontoon boat or inflatable. The pump pushes air on both the up and down stroke taking the chore out of inflating pontoon boats and float tubes. These double action pumps feature sturdy, non-corrosive plastic, ideal for use on large inflatable watercraft, and include a hose and three sizes of connection nozzles to fit most any valve.Pumps air on both up and down strokesSturdy, non-corrosive plasticIdeal for use on large inflatable watercraftsIncludes a hose and three sizes of connection nozzlesPush-in hose-to-pump connection to inflate or deflate

Edelbrock Nitrous Oxide – Series 2 Direct Port Super Victor Kit – 125-250 hp [Universal - Fits all Vehicles] $564.25 “Match one of the Edelbrock Direct Port Nitrous Kits with an Edelbrock Bottle Kit for maximum race-level performance with the bottle/bracket combination you want. Series 2 low-pressure stainless steel nozzles, jets and lines plus all necessary fittings are included in the Direct Port Kits.”

Edelbrock Nitrous Oxide – Series 2 Direct Port Victor Kit – 75-150 hp [Universal - Fits all Vehicles] $564.25 “Match one of the Edelbrock Direct Port Nitrous Kits with an Edelbrock Bottle Kit for maximum race-level performance with the bottle/bracket combination you want. Series 2 low-pressure stainless steel nozzles, jets and lines plus all necessary fittings are included in the Direct Port Kits.”

Edelbrock Nitrous Oxide – Series 2 Low-Pressure Nozzle – 1/16 NPT, 1 Only [Universal - Fits all Vehicles] $57.9 “Stainless steel Edelbrock/Glidden Series 2 Nitrous Nozzles are used in Victor and Super Victor Direct Port nitrous kits and are capable of 250+ horsepower gains in 4-cyl. engines using a single-stage direct-port injection system. This exclusive, patented Edelbrock/Glidden design precisely atomizes the nitrous and fuel mixture for consistent and accurate power gains with 5 to 20 lbs. of fuel pressure. Replace your outdated nozzles with Series 2 nozzlesà theyÆre a direct bolt-on upgrade for other brands that use a 90? 1/16″” NPT design.”

Oscillating Sprinkler 3800 For Watering Gardens/Lawns – Green $22.6 The Turbo Oscillating Sprinkler has a Large Area Coverage Up to 3800 Square feet. The Rubber Nozzles Are Clog Resistant and Provide Precise H2O Coverage. They are Fully Adjustable In Width and Length to Fit Any Yard. Product is green in color.Color: GreenSize:  18 x 3.25 x 7.75

Deck, Fence, And Patio Sprayer – Brown – 2 Gallon $35.1 Poly/plastic unit includes 3 different gpm fan nozzles, curved wand, and reinforced hose. Spray shield protects siding and locks on board when not in use. Funnel top design for no mess in mixing and cleaning. Translucent bottle for ease of checking fluid level.Color: BrownSize:  2 Gallon

Oscillating Sprinkler For Watering Gardens/Lawns $10.5 Water up to 2900 sq. ft.16 Nozzles for better water distributionNon puddling watering actionProven motor design to last for yearsMetal spray tube with sturdy sled designSize:  17.25 x 6.5 x 4

Full Flow Dual Shot-Off Valve – Green $6.7 Dual y poly swivel shut-off valve. 45% more water flow. Maximum water flow equals maximum performance from sprinklers and nozzles. Dual shut-off valve controls water flow for two hoses. Extra large handles for easy grip and turn. Easy on swivel connector for accurate connection to faucet.Color: Green

AC Delco 1/2 Low-Speed Electric Drill $117.99 LOW-SPEED ELECTRIC DRILL This Reversible Low-Speed Electric Drill is perfect for mixing paint, drywall compound and mortar Powerful gear-reduction motor develops 9 amps, 1,080 watts Low 550 RPM produces the high torque needed to get the job done Lock-on button allows continuous operation Lightweight and balanced design help prevent hand fatigue even on long jobs while the rear D-handle and 3-position side handle ensure stability and control at all times. 1/2″ keyed chuck. Includes 6-1/4 ft. cord. UL listed. 120V.

Evaporative Mist Cooling System: Ocean Breeze $29.95 “Create your own micro climate. The Ocean Breeze Evaporative Mist Cooling System cools the air around the installed area up to 20 degrees Fahrenheit, or more. The hotter and drier the air, the more noticeable the cooling effect. Everything needed to easily install and use the Ocean Breeze Evaporative Mist Cooling System is included, all you need is a faucet to connect the system to. Includes: 10 – Easy-to-clean misting nozzles 1 – 50 foot 3/8 inch line 1 – Faucet connector 1 – Screen 15 ?? ??C?÷ C”

Volcano Air Compressor Inflator / Deflator $228.57 Ideal for air brushing, cleaning and inflating tires, rubber boats, air mattresses, sports balls and more. Maintenance free oil-less design. 100% duty cycle. Durable, extremely quiet induction motor. Balanced for smooth, low vibration operation. Stainless steel flapper valve. Intake air filter. Built-in carry handle. Four nozzles, extra fitting and extra coil hose included. AC100-120V-60Hz. 1.0 Amperage. 50 PSI max pressure. 3.5 kilograms.

Powered Team Drinker $1067.13 PLEASE NOTE: THIS ITEM CANNOT SHIP VIA 3-DAY DELIVERY.6 Retractable coil drinking hoses with quick shutoff nozzles20 Gallon tank with extra wide threaded topRechargeable 12V power pack provides 8 hours of usePower pack may be lifted off for easy recharging and secure storagePowder coated steel cart with pneumatic tiresWeight: 60 lbs

Volcano Air Erupt Inflator $168 Inflates 1 tire in 1 1/2 minutes!Includes pressure gauge.Operates on AC 120VSecurity switch automatically cuts off if the motor overloads or overheats and resets when the motor coolsAll parts are lifetime-lubricated, no oiling is necessaryIdeal for buses, trucks, 4×4′s, vans, RVs, ATVs and carsAdditional nozzles included for use with other inflatables such as sports balls, air mats and more

Edge 6 Set Injector Nozzle System – Stage 2 [98.5-02 Dodge Cummins 5.9L] $201.6 “KEY FEATURES:;;?Çó Five configurations to choose from;;?Çó Products an additional 50-150 HP and 100-300 ft lbs of torque;;?Çó Better atomization, faster fuel flow and an enhanced spray angle increases fuel economy;;;;The proprietary process used to create these injector nozzles intricately machines 8 orifices into the tips. Compared to the stock 7-orifice injectors, Jammers feature better atomization, faster fuel flow and an enhanced spray angle. Also, the increased number of orifices enables the injectors to deliver more fuel while still maintaining proper fuel pressure. The result is more power and improved combustion-chamber cleanliness.;;;;Jammer injector nozzles are available in five configurations. The following power gains are representative of a 5.9 Dodge equipped with the Jammer injector nozzles: ;;Stage 1: 50 Horsepower – 100 Foot Pounds of Torque;;Stage 2: 75 Horsepower – 150 Foot Pounds of Torque;;Stage 3: 100 Horsepower – 200 Foot Pounds of Torque;;Stage 4: 125 Horsepower – 250 Foot Pounds of Torque;;Stage 5: 150 Horsepower – 300 Foot Pounds of Torque;;;;Across the board, Jammer nozzles can also improve fuel economy by up to 1.5 MPG depending on individual driving style.;;;;Edge Products?ÇÖ machining process also matches flow rate to within about 1% among injectors, further enhancing engine performance – the stock injectors can vary as much as 11% per set. Jammers offer incredible value to both the consumer and the retailer since the Truck?ÇÖs existing injector bodies can be easily retrofitted.;;;;Not legal for sale or use in California on pollution-controlled motor vehicles.”

Edge 6 Set Injector Nozzle System – Stage 4 [98.5-02 Dodge Cummins 5.9L] $240 “KEY FEATURES:;;?Çó Five configurations to choose from;;?Çó Products an additional 50-150 HP and 100-300 ft lbs of torque;;?Çó Better atomization, faster fuel flow and an enhanced spray angle increases fuel economy;;;;The proprietary process used to create these injector nozzles intricately machines 8 orifices into the tips. Compared to the stock 7-orifice injectors, Jammers feature better atomization, faster fuel flow and an enhanced spray angle. Also, the increased number of orifices enables the injectors to deliver more fuel while still maintaining proper fuel pressure. The result is more power and improved combustion-chamber cleanliness.;;;;Jammer injector nozzles are available in five configurations. The following power gains are representative of a 5.9 Dodge equipped with the Jammer injector nozzles: ;;Stage 1: 50 Horsepower – 100 Foot Pounds of Torque;;Stage 2: 75 Horsepower – 150 Foot Pounds of Torque;;Stage 3: 100 Horsepower – 200 Foot Pounds of Torque;;Stage 4: 125 Horsepower – 250 Foot Pounds of Torque;;Stage 5: 150 Horsepower – 300 Foot Pounds of Torque;;;;Across the board, Jammer nozzles can also improve fuel economy by up to 1.5 MPG depending on individual driving style.;;;;Edge Products?ÇÖ machining process also matches flow rate to within about 1% among injectors, further enhancing engine performance – the stock injectors can vary as much as 11% per set. Jammers offer incredible value to both the consumer and the retailer since the Truck?ÇÖs existing injector bodies can be easily retrofitted.;;;;Not legal for sale or use in California on pollution-controlled motor vehicles.”

Edge 6 Set Injector Nozzle System – Stage 1 [98.5-02 Dodge Cummins 5.9L] $172.8 “KEY FEATURES:;;?Çó Five configurations to choose from;;?Çó Products an additional 50-150 HP and 100-300 ft lbs of torque;;?Çó Better atomization, faster fuel flow and an enhanced spray angle increases fuel economy;;;;The proprietary process used to create these injector nozzles intricately machines 8 orifices into the tips. Compared to the stock 7-orifice injectors, Jammers feature better atomization, faster fuel flow and an enhanced spray angle. Also, the increased number of orifices enables the injectors to deliver more fuel while still maintaining proper fuel pressure. The result is more power and improved combustion-chamber cleanliness.;;;;Jammer injector nozzles are available in five configurations. The following power gains are representative of a 5.9 Dodge equipped with the Jammer injector nozzles: ;;Stage 1: 50 Horsepower – 100 Foot Pounds of Torque;;Stage 2: 75 Horsepower – 150 Foot Pounds of Torque;;Stage 3: 100 Horsepower – 200 Foot Pounds of Torque;;Stage 4: 125 Horsepower – 250 Foot Pounds of Torque;;Stage 5: 150 Horsepower – 300 Foot Pounds of Torque;;;;Across the board, Jammer nozzles can also improve fuel economy by up to 1.5 MPG depending on individual driving style.;;;;Edge Products?ÇÖ machining process also matches flow rate to within about 1% among injectors, further enhancing engine performance – the stock injectors can vary as much as 11% per set. Jammers offer incredible value to both the consumer and the retailer since the Truck?ÇÖs existing injector bodies can be easily retrofitted.;;;;Not legal for sale or use in California on pollution-controlled motor vehicles.”

Edge 6 Set Injector Nozzle System – Stage 1 [03-04 Dodge Cummins 5.9L] $639.98 “KEY FEATURES:;;?Çó Five configurations to choose from;;?Çó Products an additional 50-150 HP and 100-300 ft lbs of torque;;?Çó Better atomization, faster fuel flow and an enhanced spray angle increases fuel economy;;;;The proprietary process used to create these injector nozzles intricately machines 8 orifices into the tips. Compared to the stock 7-orifice injectors, Jammers feature better atomization, faster fuel flow and an enhanced spray angle. Also, the increased number of orifices enables the injectors to deliver more fuel while still maintaining proper fuel pressure. The result is more power and improved combustion-chamber cleanliness.;;;;Jammer injector nozzles are available in five configurations. The following power gains are representative of a 5.9 Dodge equipped with the Jammer injector nozzles: ;;Stage 1: 50 Horsepower – 100 Foot Pounds of Torque;;Stage 2: 75 Horsepower – 150 Foot Pounds of Torque;;Stage 3: 100 Horsepower – 200 Foot Pounds of Torque;;Stage 4: 125 Horsepower – 250 Foot Pounds of Torque;;Stage 5: 150 Horsepower – 300 Foot Pounds of Torque;;;;Across the board, Jammer nozzles can also improve fuel economy by up to 1.5 MPG depending on individual driving style.;;;;Edge Products?ÇÖ machining process also matches flow rate to within about 1% among injectors, further enhancing engine performance – the stock injectors can vary as much as 11% per set. Jammers offer incredible value to both the consumer and the retailer since the Truck?ÇÖs existing injector bodies can be easily retrofitted.;;;;Not legal for sale or use in California on pollution-controlled motor vehicles.”

Edge 6 Set Injector Nozzle System – Stage 2 [03-04 Dodge Cummins 5.9L] $699.98 “KEY FEATURES:;;?Çó Five configurations to choose from;;?Çó Products an additional 50-150 HP and 100-300 ft lbs of torque;;?Çó Better atomization, faster fuel flow and an enhanced spray angle increases fuel economy;;;;The proprietary process used to create these injector nozzles intricately machines 8 orifices into the tips. Compared to the stock 7-orifice injectors, Jammers feature better atomization, faster fuel flow and an enhanced spray angle. Also, the increased number of orifices enables the injectors to deliver more fuel while still maintaining proper fuel pressure. The result is more power and improved combustion-chamber cleanliness.;;;;Jammer injector nozzles are available in five configurations. The following power gains are representative of a 5.9 Dodge equipped with the Jammer injector nozzles: ;;Stage 1: 50 Horsepower – 100 Foot Pounds of Torque;;Stage 2: 75 Horsepower – 150 Foot Pounds of Torque;;Stage 3: 100 Horsepower – 200 Foot Pounds of Torque;;Stage 4: 125 Horsepower – 250 Foot Pounds of Torque;;Stage 5: 150 Horsepower – 300 Foot Pounds of Torque;;;;Across the board, Jammer nozzles can also improve fuel economy by up to 1.5 MPG depending on individual driving style.;;;;Edge Products?ÇÖ machining process also matches flow rate to within about 1% among injectors, further enhancing engine performance – the stock injectors can vary as much as 11% per set. Jammers offer incredible value to both the consumer and the retailer since the Truck?ÇÖs existing injector bodies can be easily retrofitted.;;;;Not legal for sale or use in California on pollution-controlled motor vehicles.”

Edge 6 Set Injector Nozzle System – Stage 3 [03-04 Dodge Cummins 5.9L] $759.98 “KEY FEATURES:;;?Çó Five configurations to choose from;;?Çó Products an additional 50-150 HP and 100-300 ft lbs of torque;;?Çó Better atomization, faster fuel flow and an enhanced spray angle increases fuel economy;;;;The proprietary process used to create these injector nozzles intricately machines 8 orifices into the tips. Compared to the stock 7-orifice injectors, Jammers feature better atomization, faster fuel flow and an enhanced spray angle. Also, the increased number of orifices enables the injectors to deliver more fuel while still maintaining proper fuel pressure. The result is more power and improved combustion-chamber cleanliness.;;;;Jammer injector nozzles are available in five configurations. The following power gains are representative of a 5.9 Dodge equipped with the Jammer injector nozzles: ;;Stage 1: 50 Horsepower – 100 Foot Pounds of Torque;;Stage 2: 75 Horsepower – 150 Foot Pounds of Torque;;Stage 3: 100 Horsepower – 200 Foot Pounds of Torque;;Stage 4: 125 Horsepower – 250 Foot Pounds of Torque;;Stage 5: 150 Horsepower – 300 Foot Pounds of Torque;;;;Across the board, Jammer nozzles can also improve fuel economy by up to 1.5 MPG depending on individual driving style.;;;;Edge Products?ÇÖ machining process also matches flow rate to within about 1% among injectors, further enhancing engine performance – the stock injectors can vary as much as 11% per set. Jammers offer incredible value to both the consumer and the retailer since the Truck?ÇÖs existing injector bodies can be easily retrofitted.;;;;Not legal for sale or use in California on pollution-controlled motor vehicles.”

Fruit Tree Spray Concentrate – Gallon $63.5 The Fruit Tree Spray Concentrate is excellent for use by a home orchardist. To use, mix 1 1/2 to 2 1/2 Tablespoons Per Gallon of Water as instructed in the Directions For Use. It is very easy to use, it mixes with water instantly, and there is no pre-mixing involved. Simply apply using a hose-end or tank sprayer. There are no plugged nozzles. Use the spray to control both insects and diseases on fruit trees, flowers, evergreens and strawberries. Product contains Captan 12%, Malathion 6%, Carbaryl 3% and a sprayer sticker.Size:  Gallon

Fruit Treat Spray Pest Control – Quart $19.4 The Fruit Tree Spray is A complete liquid fruit tree spray excellent for the home orchardist. It Controls both insects and diseases on fruit trees, flowers, evergreens and strawberries. A complete liquid fruit tree spray containing: captan 12%, malathion 6%, carbaryl. 3% and a spreader sticker. No plugged nozzles needed. To use, Mix 1 1/2 to 2 1/2 tablespoons per gallon of water as directed in the directions for use. The spray is Easy to use, mixes with water instantly with no pre-mixing. Apply using a hose-end or tank sprayer.Size:  Quart

Fruit Treat Spray Pest Control – Pint $12.7 The Fruit Tree Spray is A complete liquid fruit tree spray excellent for the home orchardist. It Controls both insects and diseases on fruit trees, flowers, evergreens and strawberries. A complete liquid fruit tree spray containing: captan 12%, malathion 6%, carbaryl. 3% and a spreader sticker. No plugged nozzles needed. To use, Mix 1 1/2 to 2 1/2 tablespoons per gallon of water as directed in the directions for use. The spray is Easy to use, mixes with water instantly with no pre-mixing. Apply using a hose-end or tank sprayer.Size:  Pint

Portable Water Chiller $699.56 PLEASE NOTE: THIS ITEM CANNOT SHIP VIA 3-DAY DELIVERY.Just add ice to the 10 gallon cooler, attach a water hose and crisp cool water is available. Copper coil inside the tank cools drinking water as it passes from a portable water hose (not included), 6 retractable coil drinking hoses with quick shut-off nozzles. Powder coated steel cart with pneumatic tires.Please note that this item cannot be shipped internationally. Freight to Hawaii or Alaska, as well as expedited shipping costs, will be quoted to you by email for your approval before the order ships.

JSP Carbon Fiber Hoods – M-Scoop (Functional) [95-99 Chrysler Neon] $589.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Trunks – Carbon Fiber [95-99 Chrysler Neon] $449.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – M-Scoop (Functional) [00-06 Chrysler Neon] $599.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – OEM (Functional) [00-06 Chrysler Neon / SRT] $589.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Trunks – Carbon Fiber [00-06 Chrysler Neon] $449.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Trunks – Carbon Fiber [02-03 Mitsubishi Lancer] $489.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – M-Scoop (Functional) [88-92 Nissan 240SX (S13)] $589.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – OEM [04-05 Nissan 350Z] $529.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – M-Scoop (Functional) [04-05 Nissan 350Z] $599.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – OEM [02-03 Nissan Altima] $619.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – OEM [95-99 Nissan Maxima] $619.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – Racing Style (Functional) [94-01 Dodge Ram] $759.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – OEM [00-04 Ford Focus] $569.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – GF [99-05 Pontiac Grand AM GT] $609.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Trunks – Carbon Fiber [99-05 Pontiac Grand AM] $499.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – OEM [95-02 Pontiac Sunfire] $559.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – Ram Air (Non-Functional) [95-02 Pontiac Sunfire] $589.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – M-Scoop (Functional) [99-04 Ford Mustang] $599.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – OEM [05-07 Ford Mustang] $800 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – M-Scoop (Functional) [03-07 Pontiac Vibe] $649.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – OEM [03-07 Saturn Ion Coupe] $569.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Trunks – Carbon Fiber [03-07 Saturn Ion Coupe] $499.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – OEM [04-07 Toyota Scion tC] $529.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – OEM [04-07 Toyota Scion xA] $529.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Trunks – Carbon Fiber [94-97 Honda Accord] $499.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – M-Scoop (Functional) [98-00 Honda Accord] $589.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Trunks – Carbon Fiber [98-02 Honda Accord 4DR] $499.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – OEM [04-07 Toyota Scion xB] $529.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – OEM (Functional) [00-05 Toyota Celica] $669.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – M-Scoop (Functional) [03-07 Toyota Corolla] $649.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – OEM [90-93 Honda Accord] $529.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – M-Scoop (Functional) [90-93 Honda Accord] $589.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Trunks – Carbon Fiber [90-93 Honda Accord 4DR] $499.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”

JSP Carbon Fiber Hoods – OEM [94-97 Honda Accord] $529.95 “JSP Carbon Fiber hoods and trunks are hand crafted in N. America with class “”A”" carbon fiber and hi tech resins. They have a proprietary clear coat that results in a beautiful wet mirror finish that is show quality and functional. UV protection prevents clouding, yellowing and allows drilling for easy installation of nozzles and hood pins. A one piece backing that is finished in high gloss black with latches riveted at four points round off these pieces of unmatched workmanship. All hoods and trunks have a weight savings of approximately 50% and are designed with O.E. matching crumple zones. Meticulous inspection is performed on each hood and trunk to ensure a perfect fit every time.”