Assessment Tools

Tungsten Carbide Grit Edge Jigsaw Blade

Norton Waterstone Starter Kit: 220/1000 grit stone, 4000/8000 grit stone, SiC flattening stone $129.00 The Norton Waterstone Sharpening Starter Kit is a complete kit for a faster, easier way to sharpen tools. The two 8 by 3 by 1-inch combination grit waterstones offer a complete grit range from 220 for major edge repair to 8000 for producing a mirror finish. The inclusion of a coarse grit, silicon carbide flattening stone allows the user the ability to quickly and easily maintain the flatness of th…

Norton IM200 -8 Three Stone Sharpening System – Fine India, Medium Crystolon, and Coarse Crystolon stones $91.33 Includes three 8″ sharpening stones, (1) fine India, (1) medium Crystolon and (1) coarse Crystolon mounted on an ABS plastic Tri Hone style holder. Fits into an ABS plastic oil reservoir base with top cover. Comes with one 4 1/2 oz. can of honing oil. Knife guide (wedge) included….

Norton Flattening Stone for Waterstones, 3/4 x 3 x 9 in plastic case $24.95 The softness of a waterstone allows it to quickly develop a fast cutting abrasive slurry. Thats a real plus for honing, but a negative when you start to develop shallow indentations and irregularities in the surface. Nortons flattening stone, when rubbed across your waterstones surface, quickly flattens and refreshes the face. Its coarse grit silicon carbide promotes maximum cutting while the diag…

Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool – Glass, Stone, Ceramic $1.10 Professional Quality, 1/8 in. Shank, 180 Grit. Includes 20 assorted shapes covered with diamond particles. All bits have 1/8 in. shanks and come in convienient plastic holder. Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials….

3M Wetordry 9088NA Sandpaper, 9-Inch x 11-Inch, 5-Sheet, Assorted-Grit $2.50 The standard for Wet-or-Dry sandpaper, this paper utilizes a silicon carbide abrasive bonded with a waterproof resin to an improved paper backing, resulting in an improved rate of cut, increased abrasive life, increased flexibility, and a uniform, consistent finish. Uses include sanding new surfaces, burnishing old finishes, and feathering fine edges. Grit : Assortment # of sheets : 59″ x 11″….

50pc DIAMOND BURR SET- Ceramics Tile Glass Lapidary for ROTARY TOOLS $14.15 Assorted shapes and sizes for your work. Use them to remove burrs on glass, metal, stone, wood, ceramics, fiberglass and plastic. Diamonds are nickel-bonded to the surface and are of fine to medium grit. Each has a 1/8” shank for use with motor tools, drills, high speed die grinders, and flex shafts. Set comes in a PVC case….

Sof’feet Replacement Screens for Sof’feet Callus Remover Tool $5.50 These 100 grit silicone carbide replacement screens are used with the Sof’feet Callus Remover Tool to gently remove calluses from your feet. There are 5 replacement screens in each package. Save on shipping and purchase extra screens when you purchase the Sof’feet Callus Remover Tool, also available on Amazon.com….

Glabella Rasp, Medium Grit Tungsten Carbide, 8-1/4 (210mm), 6mm Wide $291.99 Glabella Rasp, Medium Grit Tungsten Carbide, 8-1/4″ (210mm), 6mm WideModel Number: PM-2105THIS ITEM COMES WITH A LIFETIME WARRANTY!All Instruments are special order items. All returns on Miltex Instruments will have a 25% restocking fee unless they are defective or we send the incorrect item….

Padgett Nasal Rasp, Dbl-Ended Tungsten Carbide, 3/4 Grits, 8 (203mm), 6.5mm Wide $442.99 Padgett Nasal Rasp, Dbl-Ended Tungsten Carbide, 3/4 Grits, 8″ (203mm), 6.5mm WideModel Number: PM-2031THIS ITEM COMES WITH A LIFETIME WARRANTY!All Instruments are special order items. All returns on Miltex Instruments will have a 25% restocking fee unless they are defective or we send the incorrect item….

Selected RW Carbide Grit Rasp Finger By Positec $29.17 At Positec they are committed to provide the consumer with the highest and best quality when it comes to products like this Exclusive RW Carbide Grit Rasp Finger By Positec.Rockwell “1 piece Use on wood, hardened adhesives, thin set, and masonry.” By selecting Positec RW Carbide Grit Rasp Finger – we know you chose right, because at Positec they are dedicated to meet consumers’ satisfaction….

Worx SoniCrafter? 2-1/2 In. Carbide Grit Semicircle Blade- 1pk $24.99 The Rockwell SoniCrafter? 2-1/2 In. Carbide Grit semicircle saw blade is ideal for removing grout, cutting and shaping plaster, porous concrete and masonry. It is flat on one side so you can cut into corners and flush against adjoining surfaces.

ARTU-USA, Inc. 1-3/8 In. Professional Tungsten Carbide Gritted Hole Saw w/Pilot Bit $28.99 Artu 1-3/8 In. professional tungsten carbide gritted hole saw is a continuous rim carbide grit hole saw designed for use on soft ceramic and porcelain tile, concrete block and dry wall. Makes fast holes for standard faucet and shower-head pipes. Spring ej

180 grit sand paper $4.99 180 grit sand paper

3M Sanding Screen Medium, 4-3/16 In. x 11-1/4 In. $3.99 Medium Grit Drywall Sanding Screen is made to fit most Drywall Sanding tools. Made with a sharp silicon carbide mineral for long-lasting performance.

Poultry Grit For Chickens – 5Lb $8.1 Feed manna pro poultry grit free choice in a separate feeder, or mix 1 lb with 40 lbs of feed. Product is intended for consumption by chickens. Product size: 5Lbs.Size:  5Lb

Dremel 1/4 In. Carbide Cutter Cone $11.99 A high-speed cutter with teeth made of tungsten carbide.

SoniCrafter? Triangular Rasp Blade $24.99 The Rockwell SoniCrafter? Triangular Carbide Grit Rasp is ideal for coarse grinding or rasping, for aggressive hardened material removal over large areas. Can be used on wood, hardened adhesives, and thin set masonry.

Ladies Pineapple Facet Tungsten Carbide Ring #2 $299 Ladies Pineapple Facet Tungsten Carbide Ring #2

Ladies Tungsten Carbide Comfort Fit Ring #1 $299 Ladies Tungsten Carbide Comfort Fit Ring #1

Mens Comfort Fit Tungsten Carbide Ring #8 $299 Mens Comfort Fit Tungsten Carbide Ring #8

Dremel 1/8 In. Tungsten Carbide Cutter $8.99 Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials.

Dremel 25/32 In. Silicon Carbide Stone $3.49 Silicon Carbide Grinding Stones are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.

Dremel 3/32 In. Tungsten Carbide Cutter $8.99 Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials.

David White 1/8 In. Carbide Cutter $8.99 Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials.

Dremel 9/32 In. Silicon Carbide Grinding Stone $3.49 Silicon Carbide Grinding Stones are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.

Dremel 1/8 In. Silicon Carbide Grinding Stone $3.49 Silicon Carbide Grinding Stones are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.

Dremel 3/16 In. Silicon Carbide Grinding Stone $3.49 Silicon Carbide Grinding Stones are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.

Norton 60 Grit, Contractor 20Pack High Performance Sanding Sheets $14.99 Premium performance sanding sheets provide up to 3 times the total performance of conventional sandpaper. These 60 grit sheets are designed for heavy removal of wood, coatings and rust as well as striping, dimensioning and shaping. They are excellent on a

John Wayne True Grit Movie Talking Bobble Head $12.99 The Duke! The Duke in the original True Grit ! Great for any fans of John Wayne! The Duke of all Western movies from the early 1950′s, John Wayne! As seen in the classic Western, True Grit ! Take home this classic John Wayne bobble head today as he stands 6-inches tall in plastic just as tough as the man himself! Tap the Duke on the dome and hear him say classic lines from True Grit ! John Wayne comes with his trusty shotgun, cowboy hat, eyepatch and boots atop a name display base.

Smooth Rounded Mens Wedding Band Tungsten Carbide Ring #4 $299 Smooth Rounded Mens Wedding Band Tungsten Carbide Ring #4

Diamond Cut Finished Comfort Fit Tungsten Carbide Ring #6 $299 Diamond Cut Finished Comfort Fit Tungsten Carbide Ring #6

Pineapple Cut Comfort Fit Tungsten Carbide Ring #7 $325 Pineapple Cut Comfort Fit Tungsten Carbide Ring #7

Mens 3D Box Illusion Tungsten Carbide Ring #3 $299 Mens 3D Box Illusion Tungsten Carbide Ring #3

Mens Flat Shiny Wedding Band Tungsten Carbide Ring #5 $299 Mens Flat Shiny Wedding Band Tungsten Carbide Ring #5

Shiny and Matte Tungsten Carbide Ring $59 Tungsten carbide men’s promise ring with a shiny and matte finish. (356FD03R) 59 Weighs approx 10.9 grams Measures 6mm wide Available in whole and half sizes 8-13 Comes in a nice gift box More tungsten male promise rings shown below

Sabona Tungsten Carbide Magnetic $139.95 Sabona Tungsten Carbide Magnetic This bracelet is a step up to the next level in Sabona Magnetic Bracelets. A 1200 gauss samarium cobalt magnet is in each of the tungsten carbide links that are very scratch-resistant! The Copper Theory Various forms of copper have been used for medicinal purposes throughout the history of mankind. Ancient Egyptian Greek, Roman, and Aztec writings record consistent medicinal uses of copper. Today as more information becomes available, alternative health care and home remedies are gaining popularity. Health publications include copper bracelets as a home remedy to possibly ease the pain from arthritis in some people who get an insufficient amount of copper from their food. One study found patients wearing copper bracelets absorbed an average of 13 milligrams of copper during a month. This could bring many people into the recommended daily intake for copper 1.5 to 3 milligrams . Copper absorbed through the skin gets into circulation very efficiently, more so than most dietary copper. Superoxide Dimutase SOD is one of the body�s own copper dependent enzymes that reduces pain and inflammation. The body may use copper to make more of its own SOD. The Magnetic Theory Magnets have been uses in different cultures over the years by those who believe that magnets worn on the body promote good health. The theory is that magnet therapy is beneficial by affecting the circulatory system, the blood flow in the body. Increased circulation is beneficial because the body gets more of the nutrients it needs from the blood. Get the best of both worlds and feel the benefit of copper and magnets that can only be found in a genuine SABONA bracelet. FAQs Q: How long should I wear the bracelet? Can I shower with it? A: Wear the bracelet constantly. Wearers report that the products provide them the most benefit when worn all the time, even at night, or in the shower. Q: Will all Sabona bracelets turn my wrist green? A: If your Sabona bracelet contains copper, it will turn your wrist green. This is the copper from the bracelet being absorbed by your body. The green mark can be removed with soap and water, or lemon juice. Sabona Executive Magnetic Bracelets do not contain copper, and will not turn your wrist green. Q: How do I clean my Sabona bracelet? A: Clean your Sabona as you would your other jewelry. Use a a

Dremel 220 Grit Sanding Discs $4.39 Dremel accessories and attachments are designed to be just what you need to complete projects.

Dremel 5/16 In. Cone Structured Tooth Tungsten Carbide Cutter $11.99 Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials.

Dremel 3/4 In. Wheel Structured Tooth Tungsten Carbide Cutter $11.99 Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials.

Men’s Tungsten Carbide Promise Ring with a Brushed Finish $59 Men’s heavy weight Tungsten Carbide band promise ring with a ridged edge. (356FD02R) 59 Brushed center and polished edges Measures 7mm wide Weighs approx 13.5 grams Available in whole and half sizes 8-13 Comes in a nice gift box

DEWALT 7-1/4 In. 18-Tooth Carbide Circular Saw Blade $10.99 Tougher tungsten carbide stays sharper longer. All blades feature 5/8 In. arbor with diamond knock-out. Ribbed heat vents allow blade to run cooler, reducing blade flexing and binding. Thin kerf for smoother cuts. Anti-stick coating reduces friction and

ARTU-USA, Inc. 1-1/4 Tungsten Carbide Gritted Hole Saw $9.99 Tungsten Carbide Gritted ARTU Hole Saws will last longer and cut faster than conventional hole saws. The unique design of this hole saw enables it to cut through materials that other hole saws will barely scratch. Tough Tungsten Carbide particles replace

ARTU-USA, Inc. 2-1/8 Tungsten Carbide Gritted Hole Saw $10.99 Tungsten Carbide Gritted ARTU Hole Saws will last longer and cut faster than conventional hole saws. The unique design of this hole saw enables it to cut through materials that other hole saws will barely scratch. Tough Tungsten Carbide particles replace

ARTU-USA, Inc. 1-3/4 Tungsten Carbide Gritted Hole Saw $10.99 Tungsten Carbide Gritted ARTU Hole Saws will last longer and cut faster than conventional hole saws. The unique design of this hole saw enables it to cut through materials that other hole saws will barely scratch. Tough Tungsten Carbide particles replace

Dremel Engraver Carbide Point $8.99 Dremel accessories are designed to be just what you need to complete projects.

Ariat Man’s Carbide H20 $174 Smartly designed with only the highest quality of materials resulting in uncompromised quality, durability and unrivaled comfort.

Norton 220 Grit, Contractor 20 Pack Premium High Performance Sanding Sheets $9.99 Premium performance sanding sheets provide up to 3 times the total performance of conventional sandpaper. These 220 grit sheets are designed for final sanding of bare wood surfaces, metal, plastic and fiberglass as well as after priming, staining or seal

Norton 4 In. NORZON Flap Disc 80 Grit $8.99 Flap discs cut and grind like a type 27 depressed center wheel and finish like a fiber disc. Flap discs last at least 20 times longer than the same diameter fiber disc and provide a faster cut rate and finer finish. These flap disc have a unique quick loa

Norton 4 In. NORZON Flap Disc 60 Grit $8.99 Flap discs cut and grind like a type 27 depressed center wheel and finish like a fiber disc. Flap discs last at least 20 times longer than the same diameter fiber disc and provide a faster cut rate and finer finish. These flap disc have a unique quick loa

Norton 4 In. NORZON Flap Disc 40 Grit $8.99 Flap discs cut and grind like a type 27 depressed center wheel and finish like a fiber disc. Flap discs last at least 20 times longer than the same diameter fiber disc and provide a faster cut rate and finer finish. These flap disc have a unique quick loa

Dremel 1/4 In. 120 Grit Sanding Bands $3.99 Dremel accessories are designed to be just what you need to complete the project.

Norton 4 In. x 24 In. Belt 50 Grit $6.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 6 In. No Hole Stick & Sand 150 Grit $17.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 3/4 In. x 3/4 In. SPIRABAND 60 Grit $2.99 Spiral bands have spiral construction which avoids shadow marks and provides smooth cutting action. Achieve close tolerances when finishing curved or contoured areas and hard to reach areas. Fast cutting and removes toughest material. Sleeves are easily r

Norton 3/4 In. x 3/4 In. SPIRABAND 100 Grit $2.99 Spiral bands have spiral construction which avoids shadow marks and provides smooth cutting action. Achieve close tolerances when finishing curved or contoured areas and hard to reach areas. Fast cutting and removes toughest material. Sleeves are easily r

Dremel 1/4 In. 60 Grit Coarse Sanding Bands $2.99 Dremel accessories are designed to be just what you need to complete the project.

Norton 1 In. x 1 In. SPIRABAND 100 Grit $2.99 Spiral bands have spiral construction which avoids shadow marks and provides smooth cutting action. Achieve close tolerances when finishing curved or contoured areas and hard to reach areas. Fast cutting and removes toughest material. Sleeves are easily r

Norton 3/4 In. x 3/4 In. SPIRABAND 150 Grit $2.99 Spiral bands have spiral construction which avoids shadow marks and provides smooth cutting action. Achieve close tolerances when finishing curved or contoured areas and hard to reach areas. Fast cutting and removes toughest material. Sleeves are easily r

Norton 1 In. x 1 In. SPIRABAND 60 Grit $2.99 Spiral bands have spiral construction which avoids shadow marks and provides smooth cutting action. Achieve close tolerances when finishing curved or contoured areas and hard to reach areas. Fast cutting and removes toughest material. Sleeves are easily r

Norton 1 In. x 1 In. SPIRABAND 150 Grit $2.99 Spiral bands have spiral construction which avoids shadow marks and provides smooth cutting action. Achieve close tolerances when finishing curved or contoured areas and hard to reach areas. Fast cutting and removes toughest material. Sleeves are easily r

Norton 2 In. x 2 In. SPIRABAND 60 Grit $3.99 Spiral bands have spiral construction which avoids shadow marks and provides smooth cutting action. Achieve close tolerances when finishing curved or contoured areas and hard to reach areas. Fast cutting and removes toughest material. Sleeves are easily r

Norton 2 In. x 2 In. SPIRABAND 150 Grit $3.99 Spiral bands have spiral construction which avoids shadow marks and provides smooth cutting action. Achieve close tolerances when finishing curved or contoured areas and hard to reach areas. Fast cutting and removes toughest material. Sleeves are easily r

Norton 2 In. Grinding Disc 24 Grit $3.99 The tool free, twist-on and off fastening systems make fast work of disc changes to maximize productivity by minimizing downtime.

Norton 2 In. Grinding Disc Medium 50 Grit $3.99 The tool free, twist-on and off fastening systems make fast work of disc changes to maximize productivity by minimizing downtime.

Dremel Multi-Max Sandpaper Mixed Grit $5.99 The Dremel Multi-Max offers do-it-yourselfers and pros a versatile and effective multitasking tool. And its accessories can take on a variety of projects that involve repair, remodeling, or restoration. This includes cutting, grinding, sanding, scraping

Blue Grit Ultimate Clean Deodorant Soap $5.99 Men’s 3 x 4 oz Soap.

DEWALT 7-1/4-In. 24-Tooth Carbide-Tipped Framing Saw Blades $9.99 The DEWALT 24 Tooth Circular Saw Blade is an ideal solution for professionals who need their blades to stay sharper longer. The tough tungsten carbide extends the life of this blade so you get maximum cost effectiveness and performance. DEWALT thoroughl

DEWALT Construction 7-1/4 36T Carbide Thin Kerf Circular Saw Blade $17.99 The DEWALT 7-1/4″ 36T Carbide Thin Kerf Circular Saw Blade was extensively tested on a wide range of real-world wood, plywood, and wood composite cutting applications. The blade was designed to stay sharp as long as possible, so you can be sure that the

OLDHAM 10 In. 40 Tooth Industrial Carbide Combination Saw Blade $19.99 Oldham Industrial Carbide saw blades provide high-quality performance ideal for construction and home project use. This Finishing blade has 40 teeth for extra-clean cutting. Cuts all wood materials faster and more cleanly than steel blades. Lasts 10 times

General Tools & Instruments Carbide Scriber $5.99 This durable scriber is a terrific pickup for making quick and accurate marks in the hardest work pieces. In addition, the Utility Scriber includes a permanent magnet affixed to the cap for retrieving and cleaning loose metal shavings.

Norton No. 02706, 120 Grit Detail Sandpaper for Ryobi Corner Cat $4.99 Detail sanding sheets with hook and loop backing uniquely designed to fit either the mouse or corner cat sanders. Clog resistant coating and resin bon provide quick cut and long

Norton 4-1/2 In. x 7/8 In. Bulk Fiber Disc 36 Grit $1.99 Fiber discs featuring a full resin bond system with heavy duty fiber backing for increased strength, durability, and tear resistance.

Norton 4 In. x 24 In. Belt NORZON Bulk 120 Grit $6.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 7 In. x 7/8 In. Fiber Disc 16 Grit $1.99 Fiber discs featuring a full resin bond system with heavy duty fiber backing for increased strength, durability, and tear resistance.

Norton 7 In. x 5/8-11 20 x Flap Disc 80 Grit $12.99 Flap discs cut and grind like a type 27 depressed center wheel and finish like a fiber disc. Flap discs last at least 20 times longer than the same diameter fiber disc and provide a faster cut rate and finer finish. These flap disc have a unique quick loa

Norton 60 Grit, 10 Pk Detail Sanding Sheet, Triangle, For Ryobi $3.99 Triangle shapes detail sanding sheets have pressure sensitive adhesive backing for quick and easy changes. Design exclusively for Ryobi detail sanders they are made from heavy duty resin bonded cloth back abrasives for resistance to the wear and tear comm

Norton 5 In. 8 Hole Hook & Loop Disc 220 Grit $3.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 100 Grit, Contractor 20Pack High Performance Sanding Sheets $9.99 Superior sanding performance for a premium surface finish. Excellent on all surfaces and coatings. Will not clog, tear or transfer color

Norton 5 In. 5 Hole Hook & Loop Disc 150 Grit $10.99 For stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 5 In. 5 Hole Hook & Loop Disc 220 Grit $3.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 5 In. No Hole Stick & Sand Disc 60 Grit $12.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 6 In. No Hole Stick & Sand Disc 80 Grit $17.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 4.5 In. x 10 Yd. Stick and Sand Roll 150 Grit $16.99 Rolls of adhesive backed sandpaper can be cut to preferential length. For general purpose hand or machine sanding wood, metal, plastic and fiberglass as well as removing old paint.

Norton 5 In. 8 Hole Hook & Loop Disc 60 Grit $3.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 180 Grit, Fine 3-In-1 Detail Sandpaper For Black & Decker Sander $6.99 Detail sanding sheets with hook and loop backing are designed for use on the RO600 Mega Mouse or Sandstorm detail sander. Detail sanding sheets allow the end user to sand large flat surfaces as well as get into tight corners that other tools or abrasive s

Norton 5 In. 8 Hole Hook & Loop Disc 100 Grit $3.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 3 In. x 21 In. Belt Job Pack 120 Grit $11.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 3 In. x 18 In. Belt NORZON Bulk 80 Grit $3.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 3 In. x 18 In. NORZON Belt Job Pack 50 Grit $10.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 3 In. x 18 In. NORZON Belt 80 Grit Job Pack $10.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 5 In. 5 Hole Hook & Loop Disc 60 Grit $3.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 3 In. x 21 In. Belt NORZON Bulk 80 Grit $3.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 3 In. x 21 In. Belt NORZON Bulk 36 Grit $3.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 5 In. 8 Hole Hook & Loop Disc 150 Grit $10.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 5 In. 8 Hole Stick & Sand Disc 220 Grit $3.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 5 In. 8 Hole Stick & Sand Disc 150 Grit $3.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 3 In. x 24 In. Belt NORZON Bulk 120 Grit $3.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 3 In. x 24 In. Belt NORZON Bulk 80 Grit $3.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 3 In. x 21 In. NORZON Belt Bulk 120 Grit $3.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 3 In. x 24 In. Belt NORZON Bulk 50 Grit $3.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 4 In. x 24 In. Belt NORZON Bulk 80 Grit $6.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 3 In. x 18 In. NORZON Belt Job Pack 120 Grit $10.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton Coarse Grit 3 In. x 21 In. Premium Performance Sanding Belts $4.99 Premium zirconia alumina abrasive portable belts are the best choice for high speed sanding and finishing of flat surfaces. Best when used on wood, plastic and fiberglass, grinding and finishing of all metals. Blend welds and abrasive planing of wood

Norton 3 In. x 18 In. Belt NORZON Bulk 120 Grit $3.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 5 In. 8 Hole Stick & Sand Disc 60 Grit $3.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 9 In. Pressure Sensitive Adhesive Cloth Disc 80 Grit $6.99 PSA (Pressure sensitive adhesive) cloth back discs are ideal for all maintenance and repair applications, from medium grinding to light deburring.

Norton 6 In. Pressure Sensitive Adhesive Cloth Disc 120 Grit $4.99 PSA (Pressure sensitive adhesive) cloth back discs are ideal for all maintenance and repair applications, from medium grinding to light deburring.

Norton 120 Grit, Medium 3-In-1 Detail Sandpaper For Black & Decker Sander $6.99 Detail sanding sheets with hook and loop backing are designed for use on the RO600 Mega Mouse or Sandstorm detail sander. Detail sanding sheets allow the end user to sand large flat surfaces as well as get into tight corners that other tools or abrasive s

Norton 3 In. x 21 In. Medium 80 Grit Premium Portable Belts $4.99 For high speed sanding and finishing of flat surfaces. Use on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood

Norton 3 In. x 24 In. Belt Job Pack 50 Grit $7.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 3 In. x 18 In. Belt NORZON Bulk 50 Grit $3.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 80 Grit, Coarse 3-In-1 Detail Sandpaper For Black & Decker Sander $6.99 Detail sanding sheets with hook and loop backing are designed for use on the RO600 Mega Mouse or Sandstorm detail sander. Detail sanding sheets allow the end user to sand large flat surfaces as well as get into tight corners that other tools or abrasive s

Norton 7 In. x 5/8-11 20 x Flap Disc 40 Grit $12.99 Flap discs cut and grind like a type 27 depressed center wheel and finish like a fiber disc. Flap discs last at least 20 times longer than the same diameter fiber disc and provide a faster cut rate and finer finish. These flap disc have a unique quick loa

Norton 5 In. 5 Hole Hook & Loop Disc 100 Grit $3.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 5 In. 8 Hole Stick & Sand Disc 100 Grit $3.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 5 In. 8 Hole Hook & Loop Disc 120 Grit $10.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 5 In. 8 Hole Hook & Loop Disc 80 Grit $10.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 5 In. 8 Hole Hook & Loop 150 Grit $3.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 5 In. No Hole Stick & Sand Disc 220 Grit Job Pack $11.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 5 In. No Hole Stick & Sand Disc Job Pack 100 Grit $11.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 9 In. Pressure Sensitive Adhesive Cloth Disc 120 Grit $6.99 PSA (Pressure sensitive adhesive) cloth back discs are ideal for all maintenance and repair applications, from medium grinding to light deburring.

Norton 4.5 In. x 4.5 In. Stick & Sand Sheet 150 Grit $2.99 For general purpose hand or machine sanding wood, metal, plastic and fiberglass as well as removing old paint. The 4-1/2 In. x 5-1/2 In. sheets fit all standard 1/4 sheet palm sanders.

Norton 4 In. x 24 In. Belt Job Pack 120 Grit $11.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 4 In. x 24 In. Belt Job Pack 80 Grit $11.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 3 In. x 24 In. Belt Job Pack 120 Grit $7.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 5 In. 5 Hole Hook & Loop Disc 40 Grit $10.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 3 In. x 24 In. Belt Job Pack 80 Grit $7.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 5 In. 5 Hole Hook & Loop Disc 80 Grit $10.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 5 In. 8 Hole Hook & Loop Disc 40 Grit $10.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 5 In. 5 Hole Hook & Loop Disc 120 Grit $10.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 5 In. Pressure Sensitive Adhesive Cloth Disc 80 Grit $4.99 PSA (Pressure sensitive adhesive) cloth back discs are ideal for all maintenance and repair applications, from medium grinding to light deburring.

Norton 5 In. 5 Hole Hook & Loop Disc 180 Grit $10.99 Discs are used for stripping paint and primer, blending, leveling, finishing, dimensioning, and sanding of bare wood, metal, fiberglass, and plastic.

Norton 3 In. x 21 In. Belt NORZON Bulk 50 Grit $3.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton No. 02707, 80 Grit Detail Sandpaper for Ryobi Corner Cat $4.99 Detail sanding sheets with hook and loop backing uniquely designed to fit either the mouse or corner cat sanders. Clog resistant coating and resin bon provide quick cut and long

ARTU-USA, Inc. 3 Piece 4 In. Tungsten Carbide Gritted Hole Saw Set $34.99 Tungsten carbide gritted artu hole saws are designed and manufactured with the highest and newest technology in the industry today. This incredible hole saw will last longer and cut faster than conventional hole saws. The unique design of this hole saw en

Dremel EZ Lock Cutting/Shaping Carbide Wheel $16.99 The Dremel EZ Lock makes accessory changes easy as PULL – TWIST – RELEASE. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through wood and laminates. For use with the EZ402 EZ Lock Mandrel.

Dremel 1/8 In. Multi-Max Carbide Grout Blade $34.99 The Dremel Multi-Max offers do-it-yourselfers and pros a versatile and effective multitasking tool. And its accessories can take on a variety of projects that involve repair, remodeling, or restoration. This includes cutting, grinding, sanding, scraping

Dremel 5/16 In. Structured Tooth Tungsten Carbide Cutter $11.99 Dremel accessories are designed to be just what you need to complete projects.

DEWALT 12 In. 80T and 12 In. 32T Saw Blade $61.99 Tougher tungsten carbide stays sharper longer

3M Drywall Sanding Sheets, 4.1875 In. x 11 In., 2 Sheet Fine Grit $3.49 3M drywall sanding sheets attach quickly to hand or pole sanders with pre-cut tabs. They cut fast and smooth for use sanding drywall joint and patching compounds and plaster to a fine finish.

SandBlaster Flexible Finishing Pad, 3.7 In. x 9.25 In. (9,3 cm x 23,5 cm) 400 Grit, 2/pk $8.99 The 3M” SandBlaster” flexible finishing pad is specifically designed for finishing. It features an aggressive, long-lasting abrasive that helps reduce the amout of time needed to sand. The pad conforms to any surface shape making it particularly effective

Norton 4 In. x 5/8 In. 36 Grit All Purpose Fiber Disk, Bulk Pack (Ea) $1.99 Versatile fiber backed abrasive grinding and sanding discs that are used on right angle grinders with appropriate back-up pad and lock nut for stripping paint and coatings, light deburring and finishing, weld grinding and blending and heavy removal of met

Norton 4 In. x 5/8 In. 50 Grit All Purpose Fiber Disk, Bulk Pack (Ea.) $1.99 Versatile fiber backed abrasive grinding and sanding discs that are used on right angle grinders with appropriate back-up pad and lock nut for stripping paint and coatings, light deburring and finishing, weld grinding and blending and heavy removal of met

Norton 4-1/2 In. x 7/8 In. 36 Grit All Purpose Fiber Disk, Bulk Pack (EA) $1.99 Versatile fiber backed abrasive grinding and sanding discs that are used on right angle grinders with appropriate back-up pad and lock nut for stripping paint and coatings, light deburring and finishing, weld grinding and blending and heavy removal of met

Norton 4-1/2 In. x 7/8 In. 50 Grit All Purpose Fiber Disk, Bulk Pack (EA) $1.99 Versatile fiber backed abrasive grinding and sanding discs that are used on right angle grinders with appropriate back-up pad and lock nut for stripping paint and coatings, light deburring and finishing, weld grinding and blending and heavy removal of met

Norton 4 1/2 In. x 5/8-11 20 x Flap Disc 40 Grit $9.99 Flap discs cut and grind like a type 27 depressed center wheel and finish like a fiber disc. Flap discs last at least 20 times longer than the same diameter fiber disc and provide a faster cut rate and finer finish. These flap disc have a unique quick loa

Norton 7 In. x 5/8 In. 50 Grit All Purpose Fiber Disk, Bulk Pack (EA) $1.99 Versatile fiber backed abrasive grinding and sanding discs that are used on right angle grinders with appropriate back-up pad and lock nut for stripping paint and coatings, light deburring and finishing, weld grinding and blending and heavy removal of met

Norton 7 In. x 5/8 to 11 NORZON 20X Flap Disc 60 Grit $12.99 Flap discs cut and grind like a type 27 depressed center wheel and finish like a fiber disc. Flap discs last at least 20 times longer than the same diameter fiber disc and provide a faster cut rate and finer finish. These flap disc have a unique quick loa

Norton 7 In. x 5/8 In. 36 Grit All Purpose Fiber Disk, Bulk Pack (Ea) $1.99 Versatile fiber backed abrasive grinding and sanding discs that are used on right angle grinders with appropriate back-up pad and lock nut for stripping paint and coatings, light deburring and finishing, weld grinding and blending and heavy removal of met

Norton 4-1/2 In. x 5-1/2 In. Medium 100 Grit Sandpaper Sheets (Pkg. of 6) $1.99 For general purpose hand or machine sanding wood, metal, plastic and fiberglass as well as removing old paint. The 4-1/2 In. x 5-1/2 In. sheets fit all standard 1/4 sheet palm sanders.

Norton 4-1/2 In. x 4-1/2 In.60Coarse Grit 5 Pk All-Purpose Sander Sheet, Stick & Sand $2.99 Clog resistant pressure sensitive adhesive coated sheets attach to palm sanders without the need for clips for quick and easy replacement of sheets. The clog resistant coating is compatible with all types of coatings.

Norton 7 In. x 5/8 In. 24 Grit All Purpose Fiber Disk, Bulk Pack (EA) $1.99 Versatile fiber backed abrasive grinding and sanding discs that are used on right angle grinders with appropriate back-up pad and lock nut for stripping paint and coatings, light deburring and finishing, weld grinding and blending and heavy removal of met

Norton 3 In. x 18 In. Belt Aluminum Oxide Job Pack 120 Grit $5.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 3 In. x 18 In. Belt aluminum Oxide Job Pack 80 Grit $5.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 4 In. x 24 In. Belt aluminum Oxide Job Pack 220 Grit $10.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 9 In. x 11 In. 3X Sheet 320 Grit-Job Pack (20 count) $9.99 Superior sanding performance for a premium surface finish. Excellent on all surfaces and coatings. Will not clog, tear or transfer color

Norton 6 In. x 48 In. Belt aluminum Oxide Handy Pack 80 Grit $6.99 Bench stand belts are used for most dimensioning, intermediate grinding and polishing applications. Applications include heavy stock removal, finish sanding, deburring of steel, and removing saw marks.

Norton 6 In. x 48 In. Belt aluminum Oxide Handy Pack 120 Grit $6.99 Bench stand belts are used for most dimensioning, intermediate grinding and polishing applications. Applications include heavy stock removal, finish sanding, deburring of steel, and removing saw marks.

Norton 6 In. x 48 In. Belt Aluminum Oxide Handy Pack 50 Grit $6.99 For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.

Norton 5 In. 5 & 8 Hole Premium 100 Grit, Pack Of 2 Sanding Disk $3.99 Patented ceramic alumina abrasive lasts 3 times longer than conventional aluminum oxide discs providing consistent finish. These discs are tear and clog resistant, will not contaminate a surface finish and the hook and loop backing allows for quick and ea

Norton 5 In. 5 & 8 Hole, Premium 60 Grit, Pk Of 3 Sanding Disc $3.99 Patented ceramic alumina abrasive lasts 3 times longer than conventional aluminum oxide discs providing consistent finish. These discs are tear and clog resistant, will not contaminate a surface finish and the hook and loop backing allows for quick and ea

Norton 5 In. 5 & 8 Hole, Premium 220 Grit, Pack of 2 Sanding Disk $3.99 Patented ceramic alumina abrasive lasts 3 times longer than conventional aluminum oxide discs providing consistent finish. These discs are tear and clog resistant, will not contaminate a surface finish and the hook and loop backing allows for quick and ea

Skil 7-1/4 In. 24 Tooth Carbide Circular Saw Blade $6.59 Skil’s line of circular saw blades feature cutting edge technology backed by legendary performance. Circular saw blade sets offer convenient combinations of the most popular Skil blades for almost any application.

Skil 10 In. 28 Tooth Carbide Circular Saw Blades $14.99 Skil’s line of circular saw blades feature cutting edge technology backed by legendary performance. Circular saw blade sets offer convenient combinations of the most popular Skil blades for almost any application.

Bosch 3/4 In. Carbide Tipped Double Flute Straight Router Bit $20.99 Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, extended bit life, extra sharp cutting edges and low vibration.

Skil 7-1/4 In. 18 Tooth Carbide Circular Saw Blade $4.99 Skil’s line of circular saw blades feature cutting edge technology backed by legendary performance. Circular saw blade sets offer convenient combinations of the most popular Skil blades for almost any application.

Skil 7-1/4 In. 40 Tooth Carbide Circular Saw Blades $9.99 Skil’s line of circular saw blades feature cutting edge technology backed by legendary performance. Circular saw blade sets offer convenient combinations of the most popular Skil blades for almost any application.

Norton 7 In. Type 27 Wheels Masonry – Silicon Carbide UPC $4.99 1/4 In. thick depressed center type 27 shaped grinding wheels are designed for offhand stock removal of all types of masonry smoothing surfaces and removing parting lines from molds

Bosch 3/8 In. Carbide Tipped Double Flute Straight Router Bit $14.99 Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, extended bit life, extra sharp cutting edges and low vibration.

Bosch 1/2 In. Carbide Tipped Double Flute Straight Router Bit $15.99 Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, extended bit life, extra sharp cutting edges and low vibration.

Bosch 3/16 In. Carbide Tipped Single Flute Straight Router Bit $12.99 Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, extended bit life, extra sharp cutting edges and low vibration.

Stainless Steel Sieve Set 4 Pieces With 3 Screens $39.95 Stainless steel 4 piece sieve set with 3 screens. Used to sift soil, gravel, mulch, akadama and grit.

Craftsman Speed-Lok 4pc Glass & Tile Drill Bit Set $12.99 High grade tungsten carbide tip for drilling glass and tile materials.

Bosch 7/8 x 12 In. SDS-Plus Rotary Hammer Bit $31.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 5/8 x 18 In. SDS-Plus Rotary Hammere Bit $26.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 1/4 x 4 In. SDS-Plus Rotary Hammer bit $4.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 3/16 x 6 In. SDS-Plus Rotary Hammer Bit $5.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 1/4 x 6 In. SDS-Plus Rotary Hammer Bit $5.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 5/16 x 6 In. SDS-Plus Rotary Hammer Bit $7.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 3/8 x 6 In. SDS-Plus Rotary Hammer Bit $6.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 1/2 x 6 In. SDS-Plus Rotary Hammer Bit $7.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 3/16 x 7 In. SDS-Plus Tapcon Rotary Hammer Bit $8.59 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 3/16 x 7 In. SDS-Plus Tapcon Rotary hammer bit $8.59 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 5/8 x 8 In. SDS-Plus Masonry Drill Bit $14.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 1/4 x 8 In. SDS-Plus Rotary Hammer Bit $7.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 3/8 x 12 In. SDS-Plus Rotary Hammer Bit $13.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 1/2 x 12 In. SDS-Plus Rotary Hammer Bit $17.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 5/8 x 12 In. SDS-Plus Rotary Hammer Bit $20.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 3/4 x 12 In. SDS-Plus Rotary Hammer Bit $24.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 1/2 x 18 In. SDS-Plus Rotary Hammer Bit $21.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Bosch 1 x 18 In. Rotary Hammer Bit $39.99 Bosch offers a full line of carbide bits, carbide cores and steel points and chisels for hammer drills, rotary hammers and demolition hammers.

Tough-1 Sharpening Compound – 2 oz. $10.4 A special formula grit compound for sharpening clippers.Size:  2 oz.

Norton Depressed Center Wheels Type 27 Masonry Silicon Carbide Bulk UPC $2.69 1/8 In. thick depressed center masonry grinding wheels are designed to be used at a 90 degree angle for offhand cut-off, notching or grooving of all masonry materials

Professional Knife Sharpening Stone Whetstone $1.89 - Only water is need to lubricate the cutting edge – To achieve a surgically sharp edge on your tools, these whetstones works faster – They are for knifing and mould polishing – Small grit for burnishing with big movement and large grit keeping blade point sharp Whetstones provide a finer edge – Size: 70 x 25 x 5 mm

Parakeet Gravel Supplement For Birds $47.6 The Parakeet Gravel is a digestive aid. It provides grit essential to digestion for small and medium birds. It is made with oyster shells and flaxed charcoal. Product size: 2 Lb.

ARTU-USA, Inc. Small Bayonet Mandrel for artu Hole Saw $8.99 For artu tungsten carbide gritted hole saws 1-1/4 In. to 3-1/4 In. and requires artu’s pilot bits, #02953.

Dremel 408 Sanding Bands $3.49 Dremel 408 An abrasive band made of aluminum oxide, classified as coarse 60 grit. Ideal for rough-shaping and smoothing wood and fiberglass–as well as removing rust from metal surfaces, shaping rubber surfaces and more

Norton 4-1/2 In. Pad Kit Back-up Pad For Fiber Discs Using An Angle Grinder $11.99 Back-up pad kit for 4-1/2 in. right angle grinders comes complete with a high density spiral cooled back-up pad, one 5/8-11 lock nut and two 50 grit fiber discs

Norton 7 In. x 7/8 In. Pad Kit Back-up Pad For Fiber Discs Using An Angle Grinder $12.99 Back-up pad kit for 7 in. right angle grinders comes complete with a high density spiral cooled back-up pad, one 5/8-11 lock nut and two 50 grit fiber discs

Rugged Ridge BRAKE DRUMS $12.45 BRAKE DRUMS Drums are consistent, quiet and offers confident braking They are engineered to dissipate heat and stand up to continuous contact with water, road grit, and abrasives Drum brakes contribute to the effectiveness of vehicle braking.

Emgo REPLACEMENT FUEL FILTERS $3.84 REPLACEMENT FUEL FILTERS Perfect replacement for clogged or dirty original in-line filter Helps restore filtering efficiency.;traps dirt and grit before they can cause damage Sealed molded nylon case with paper filter element.

8mm Cz Black Carbon Fiber Tungsten Ring for Men $59 Men’s tungsten carbide and black carbon ring with cubic zirconia accent. (356FD01R) 59 Measures 8mm wide Weighs approx 11.7 grams Available in whole and half sizes 8-13 Comes in a nice gift box More tungsten carbide rings for men shown below More Chamilia beads shown below